Cart 0

Shop For


At Outfab, we take your custom CAD drawing and laser cut it out of your material of choice. You can browse our materials above. The material, time, and US shipping are included. Let's say that again! Cost includes laser cutting and shipping in the US. Anything you can fit onto your chosen size of material! Really!

If you aren't familiar with vector graphics, head over to Vector Graphics 101 on the tips page.

1. Find the material you want to use and decide on a size. Set up your CAD(Inkscape, CorelDRAW or Illustrator) page to that size and get designing! Need some help? Check out our tips page.

2. Upload your completed vector design file to that material, make sure the dimensions are correct, and add to cart.

3. Checking out will pre-authorize Payment - we won't charge your card or paypal account until human eyes have given your order a once over.

4. When payment is accepted, you'll know your job is up next for cutting. We'll then ship it to you bagged by material type.


Know a thing or two about CAD programs like Adobe Illustrator, CorelDRAW, Inkscape, or AutoCAD?

You can set up your drawings for laser cutting with a few tweaks! Read on!

 Go from this drawing... To these perfectly cut parts
graphics prepared for laser cutting laser cut parts as result of vector graphics file

Accepted File Formats:
PDF (uncompressed) - RGB colors, text converted to curves, no images.
If you cannot save as or export your design as a PDF send us an email. While you can use many programs to design, only files saved as PDF FROM Inkscape, CorelDRAW, or Illustrator will work with our current set up. Your final design must be saved to PDF from one of these programs:

Largest File Size: 1MB

Accepted Lines and Fills:
The colors must be RGB values shown below and not CMYK. 
What it looks like on the screen What it looks like cut out (birch wood)

BLUE STROKE LINES RGB (0,0,255) Hex #0000FF Under .25pt width

VECTOR ETCH (for very thin lines):

RED HEAVY ETCH STROKE LINES RGB (255,0,0) Hex #FF0000 under .25pt width
GREEN MEDIUM ETCH STROKE LINES RGB (0,255,0) Hex #00FF00 under .25pt width
MAGENTA LIGHT ETCH STROKE LINES RGB (255,0,255) Hex #FF00FF under .25PT width

RASTER ETCH (for areas and thick lines):

BLACK DARK ETCH FILL (or lines over .4pt) width RGB (0,0,0) Hex #000000
DARK GRAY MEDIUM ETCH FILL (or lines over .4pt) RGB (128,128,128) #808080
LIGHT GRAY LIGHT ETCH FILL (or lines over .4pt) RGB (230,230,230 #E6E6E6

Is your vector file set up now for laser cutting?
Or just getting started?
Starter Template
See our Do's and Dont's list for more set up tips that can save your file from being returned for revisions!
Due to the custom nature of our work, orders are nonrefundable if the cut results are the fault of the designer.